English
Arabic
French
Greek
Hungarian
Mongolian
Russian
Spanish
Thai
VietnameseIntroducing Our Revolutionary Car Lift
Streamline Your Operations Today!
Click the table of contents to find what you're interested in →
What is a car lift?
Car lift is one of the auto repair facilities. It refers to a device that uses hydraulic or mechanical principles to lif the car in a relatively short period of time. The working principle of the hydraulic type car lift is , through the hydraulic oil pressure, to Press the piston into the cylinder, and then the traction jack compacts the unit under the ground, thereby lifting the car, so that the maintenance workers can check, repair and install the car under the car chassis.
Uses of a car lift
Car lift is widely used in car repair shops, auto parts factories, 4S shops and other car repair fields. The small car lift can also be used in the repair room of car modification enthusiasts. This equipment has changed the original mode of using manual screw jacks, pits and other facilities for maintenance, greatly improving the working environment and improving work efficiency.
Types of car lift
Product introduction
.
There are many types of car lift products. According to the lifting power, there are hydraulic car lifts and mechanical car lifts, some car lifts are equipped with a secondary lift that uses pneumatics. According to the structure type, it is divided into single column type, double column type, four column type and scissor type
Advantages of Using a car lift
Easy to operate
Car lifts usually only need one person to operate, and can quickly lift the car in a short time.
The car lift is easy to use, and will not cause safety accidents due to irregular work or improper use.
Less space+ High efficiency
The small size of the car lift can make full use of the space, which is more economical.
The car lift can lift the car in a very short time, which saves manual power and improves work efficiency.
The structure of the car lift
Product introduction
.
The scissor car lift is composed of a lifting plate, a scissor mechanism, a hydraulic system, an electrical control box and a base.
Hydraulic system
The hydraulic system is the core part of the scissor car lift, which consists of hydraulic pumps, fuel tanks, piping, throttle valves and hydraulic cylinders. When the car needs to be lifted, turn on the switch of the hydraulic pump, and the hydraulic pump starts to work, sending high-pressure oil to the hydraulic cylinder. At this time, the piston in the hydraulic cylinder receives the oil pressure and starts to apply force to the bottom of the mechanism to make the mechanism rise. At the same time, the flow direction of the oil in the hydraulic cylinder is controlled by the check valve, so that the base is locked to prevent the scissor car lift from moving or tilting during the lifting process.
Scissor mechanism
The scissor mechanism is another key part of the scissor car lift, which is composed of multiple scissor structures to form a fork structure. When the hydraulic system starts to work, applying force to the inside of the mechanism, the fork structure will rise in the axial direction. Due to its mechanical structure characteristics, when the mechanism rises to a certain height, the fork structure will be in a balanced state to achieve the purpose of lifting the vehicle.
Electrical control
The electrical control box is another accessory of the scissor car lift, which includes parts such as wiring board, circuit breaker and electrical controller. It plays the role of electrical isolation, protection and control of the lift up, down, stop and other functions. Usually, the circuit breaker of the wiring board in the electric control box is turned off. When the vehicle needs to be lifted, under the condition of ensuring the power supply, turn on the control switch of the electric control box, and the scissor car lift can start to work. Once the scissor car lift completes the lifting operation, turn off the electric control box to stop the machine from running.
Safety Tips for using a car lift
Product introduction
.
Tip One
Check whether the car lift is working properly before operation
Tip Two
The lifted vehicle shall not exceed the rated lifting weight of the car lift.
Tip Three
When lifting the vehicle, adjust the height of the rubber support pad to align with the specified lifting point of the vehicle, four corners should be on the same plane.
Tip four
There must be no oil or water on the rubber support pad. Between the rubber support pad and the car, it is forbidden to put wood or blocks of other materials.
Tip Five
The car lift should be operated by one person, and a signal should be sent to the personnel present before raising and lowering.
Tip Six
When the lifting vehicle is about 10cm above the ground, check the position of the pallet again, and shake the vehicle to check whether it is safe. After confirming that it is safe, you can continue to lift.
Tip Seven
During the lifting process, it is strictly forbidden to get off the car or anyone in the car.
Tip Eight
The car lift must not take off and land frequently. Be steady when lifting, and slow when landing.
Tip Nine
In the process of overhauling a car that has been lifted to a certain height, it is strictly forbidden to use tools such as crowbars to try to move the car or its parts.
6 Tips for Choosing the Right Hydraulic Lift Platform
Determining the following factors will help you choose the most suitable hydraulic lift platform:
Weight and height
It is necessary to consider the weight and height of the car to be lifted to determine the height and weight to be lifted by the car lift. If the car lift has insufficient load-bearing capacity or insufficient height, it will cause the car lift to tilt or break, which will cause serious damage to personal safety and the car.
Usage
It is necessary to consider the weight and height of the car to be lifted to determine the height and weight to be lifted by the car lift. If the car lift has insufficient load-bearing capacity or insufficient height, it will cause the car lift to tilt or break, which will cause serious damage to personal safety and the car.
Power supply
Based on the conditions at the job site, what kind of power supply do you need? Direct access to single-phase electricity, two-phase electricity, three-phase electricity? If it is connected directly to the electricity, what is the voltage?
Exterior color
What color do you need to spray it for? Whether need to add your company’s logo?
Frequently Asked Questions
10 Things You Must Know about Scissor Lifts before purchasing
At present, the load-bearing capacity of the car lift that our company can provide is 5000kg.
At present, the maximum rising height of our dumbwaiter can be 20 meters.
Direct access to single-phase power, two-phase power, need be determined in advance of the voltage.
The delivery time of a standard car lift is 15 days after receiving of the deposit and the contract documents confirmed by both parties.
Of course, please send us your specific needs, and we will recommend the most suitable car lift with the highest cost performance to you as soon as possible.
Because the prices of car lift depends on the different lifting heights, and different loads, different size etc., it is recommended that you send us your specific needs, and we will send you the best quotation within 1 working day.
The standard warranty period of the car lift is 12 months after delivery from the factory. Except for damage caused by human misuse and force majeure, we will provide timely after-sales service.
8.1 safety mechanical lock
The one-piece solid lock tooth adopts 10,000-watt laser cutting with higher load-bearing capacity and greatly improved safety performance.
8.2 Thickened solid arms
The thickened solid steel plate is laser cut and formed, which is strong and durable without deformation, and can lift all kinds of vehicles without failure.
8.3 bold cylinder
The oil seal at the inlet of the thickened oil cylinder has a greater lifting force, which can be lifted and lowered smoothly without turning over.
8.4 Detachable base
The base connecting rod is detachable. If you need to replace the base accessories, you only need to remove the screws without cutting.
8.5 Pin shaft oil hole
There are oil injection holes at the joints of all pin shafts, which is convenient for adding butter later to ensure the stable operation of the equipment.
